Others

[Features]: Newly upgraded adjustable AN wrench with interchangeable hex and flat nylon jackets, providing a secure grip while preventing fitting damage.

[Nylon Jackets]: The wrench comes with two interchangeable jackets—hex and flat, combining the functionality of a traditional AN wrench and a flat wrench in one tool.

[Material]: High-strength aluminum alloy wrench with a sandblasted finish for durability and corrosion resistance. Reinforced nylon jackets offer excellent heat and wear resistance.

 [Warranty]: EVIL ENERGY provides a 1-year warranty for this product. For any concerns, please reach out to us at service@ievilenergy.com.

Brand：EVIL ENERGY
Item Weight：4.49 pounds
Package Dimensions：‎12.8 x 9.72 x 5.51 inches

• Maximum pressure: 800PSI, maximum temperature: 400° F.
• Sealing: The HD clamp is sealed by is sealed by NBR O-rings.
• Size: 2.0 Inch/50.8mm,2.5 Inch/63.5mm,3.0 Inch/76.2mm,3.5 Inch/89.7mm,4.0 Inch/101.66mm.
• Application: Quick release V-Band clamp provides a leak-free, modular connection that is ideal for pressurized air applications. Compatible for clamping intake intercooler pipes, throttle body, turbocharged intake pipes, etc.
• Note: Please install the O-ring after the welding is completed and cooled down. If not, the O-ring will be damaged by high temperature during welding, resulting in leakage.

• [Universal]It can be applied to most cars, making sure there's enough room for Installation.
• [Size] Hose length: 31.5in / 0.8m,hose ID:3/8",hose OD:2/3".The thread of the inlet and outlet is M16*1.5.Capacity:300ML.
• [Baffled] The baffle is disassembled in a rotary manner, adding an appropriate amount of steel balls can increase the surface area of steam condensation and more effectively catch oil.
• [Note] When the temperature outside reaches the freezing point or below, the crank vent system will generate a much greater amount of moisture which can present a risk of freezing. Please clean your oil catch can on a weekly or install the original PCV hose.
• Oil Catch Can with or without Breather Filter: Install the oil catch can with breather filter for pre-PCV cars as a vent system or without breather filter in line between PCV hoses as a seal can.

• Premium Acoustic Control:EVIL ENERGY muffler is densely packed with excellent,sound-absorbing cotton,giving a low,deep tone that is reverberated to increase sound;Easy to install,bolts on in minutes
• Size and Construction:This muffler is available in different sizes. Please measure your car's inlet before purchasing.
  2" in 3" out-Burnt: Features 2" entry, 3" exit, 15" length.
  2.25" in 3" out-Burnt: Features 2.25" entry, 3" exit, 15" length.
  2.25" in 4" out-Burnt: Features 2.25" entry, 4" exit, 18.5" length.
  3" in 4" out-Burnt: Features 3" entry, 4" exit, 18.5" length.
• Working Principle:The walls of the muffler are made of two layers of stainless steel,which help reduce vibration and absorb sound
• Material:The production process of stainless steel is sturdy and stable
• Distinctive Appearance:The burned blue tip of the muffler offers an artistic focus point to the back of the car. Your vehicle will undoubtedly stand out among the crowd

• [Size] Breather catch can volume:750ML,The Fittings thread size of 10an is 7/8-14 UNF,Bottom pressure relief valve thread is 3/8 NPT.
• [Universal]It can be applied to most cars, making sure there's enough room for Installation.
• [Drain Valve] A drain valve at the bottom of the oil catch can makes it easier to clean and reuse.
• [Function]Separates oil particles from PCV/CCV air to prevent intake valve gunk accumulation, keep engine clean, 10AN oil catch can keep your engine at its best performance for the longest time.
• Please check the instruction manual before installation

• Size: Joins pipes with matching OD/ID from 1.75" to 5.0", width of strap: 3inch /76.2mm.
• Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.
• Advantage: No welding design, easy to install or remove.
• Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.
• Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 Nm.