Ordered some hose and fittings not to long ago and the hose would not fit in the fittings even though it was the same AN but there was a little misunderstanding but they were very good about helping me find the right hose that i need and good at working through the problems and even sent me the hose i need for free and let me keep the other stuff. 10/10 would recommend

Don’t be fooled by other cheap Chinese hose lines. These EVIL fuel lines comp in nice professional packaging and have the hose ends taped off to prevent splaying. I have purchased other 6an hoses before and they were much unnecessarily fatter inside the steel sleeve. The ID bore is also more consistent than cheap Chinese alternatives on Amazon. Buy with confidence from this seller A+++

Easy kit to use as needed.

All I can say is their stuff is top quality, with faster than most shipping at economy pricing! Give them a shot you will not regret it!

It works good！

Everything from Evil Energy has been great!Great product good price

Redoing our intercooler lines for a turbo-Hayabusa and these fit well, look wonderful, and fit our budget. Gonna be right inline with the rest of the "look" we're going for!

Works just as it should and good quality fittings

I was initially frustrated by the outer jacket fraying during installation but this technique works great and makes these sleeved lines even easier to work with than plain old stainless lines.1. Saturate a half inch band of braid with plain super glue and let dry.2. Cut through the middle of the super glue area with a hack saw or band saw - no need to tape.3. Clean up the end with nippers. I went all the way around and made a 45 degree chamfer to make entry to the fitting easier..4. Clamp hose in vice, lube with silicon grease and drive on fitting with an impact driver and 3/4" Socket.5. Lube and screw on the end with a 3/4" flare wrench.The included fittings of nice quality.The Kit has a complete variety of fittings and is an excellent value.

So far so good! Bought extra line and a few more fittings. Checked threads on all fittings and all have been fine. Will update if any issues come up

So far so good! Bought extra line and a few more fittings. Checked threads on all fittings and all have been fine. Will update if any issues come up

I wanted to replace the 1985 Toyota fuel line with an AN-6 flare fitting set up with SS Braided. Tip. Snug down the fittings tight, then come back after several minutes and snug them down again. The compression to the flare relaxes a bit, and you will find you can tighten it up another half turn comfortably. If you fail to do this, expect leaks, which is how I found this out.

Works well, great value and quick shipping.

Great quality will buy again

I’m really happy with this fitting, not to mention the first class marketing/packaging! I used digital calipers to compare this fitting to a high dollar one and they matched, so if you’re having a hard time then something is up with your process. I use a single layer of tape and a little grease and they slide right over. This fitting went together with ease, and is leak free! Thanks Evil Energy!